 |
|
| Home | Current Progress | Donor | Engine | Chassis | Exterior | Interior |
|
Window Wiper
| Some items need to be done before I mount the body permanently. I began creating the Trunk floor and the front hood latch and window wiper assembly. | |
|
|
|
|
I used the original wiper motor assembly. I used the sort arm from the sweep. I cut off the pivot arm and welded a 5" bolt and then re-welded the pivot bar back on. |
|
|
|
|
|
I mounted the motor assembly backwards and approximately the same location as the original. I wanted to be able to see the movement incase I ever need to do repair later. |
You can see here that the NEW pivot bolt clears the brake components. This systems seems to work well. |
|
|
|
|
Here is the location of the Wiper blade mount. I have temporarily mounted it with a screw that I will be later filling in to permanently mount the pivot head. |
|
